SPID SPX AZ-02
All posts by Jacek
SPID RING – 02
SPID RING – 02
Specifications
SPID RING – 02 | SPID RING – 02 HR | |
---|---|---|
Rotating Torque – 1 motor @ 24V: | > 1700 Nm | > 1700 Nm |
Rotating Torque – 2 motor @ 24V: | > 3050 Nm | > 3050 Nm |
Vertical load: | 80 KG | 80 KG |
Break type: | Double worm | Double worm |
Carter: | Metal (Galvanised) | Metal (Galvanised) |
Gear: | Metal (Galvanised) | Metal (Galvanised) |
Mast plate: | Metal (Galvanised) | Metal (Galvanised) |
Reduction ratio: | 1:15000 | 1:15000 |
Endocer type: | Magnetic 1 pulse | Magnetic 32 pulse |
Precision: | 0.8º | 0.1º |
Rotation angle: | 360º +/- 180º | 360º +/- 180º |
Rotation time for 360° (12V) | ~7.5 min. | ~7.5 min. |
Rotation time for 360° (24V) | ~3.7 min. | ~3.7 min. |
Electric motor: | 12V lub 24V | 12V lub 24V |
Enviornment: | -20° / +50° | -20° / +50° |
Weight antenna rotor: | 60 KG | 60 KG |
Controllers
Comparison
SPID RING – 01
SPID RING – 01
Specifications
SPID RING – 01 | SPID RING – 01 HR | |
---|---|---|
Rotating Torque: | > 900 Nm | > 900 Nm |
Vertical load: | > 40 KG | > 40 KG |
Break type: | Double worm | Double worm |
Carter: | Stal (Galvanised) | Stal (Galvanised) |
Gear: | Stal (Galvanised) | Stal (Galvanised) |
Mast plate: | Stal (Galvanised) | Stal (Galvanised) |
Reduction ratio: | 1:10200 | 1:10200 |
Endocer type: | Magnetic – 1 pulse | Magnetic – 32 pulse |
Precision: | 0.8º | 0.1º |
Rotation angle: | 360º +/- 180º | 360º +/- 180º |
Rotation time for 360° (12V): | ~4.5 min. | ~4.5 min |
Rotation time for 360° (24V): | ~2.2 min. | ~2.2 min |
Electric motor: | 12 Vdc | 12 Vdc |
Enviornment: | -20° / +50° | -20° / +50° |
Weight antenna rotor: | 45 KG | 45 KG |
Controllers
Comparison
RAU HR
RAU HR
Rotor RAU HR works with controller Rot1Prog. It it can be used for lightweight construction, such as Yagi and heavy shortwave antennas. It is based on the worm gear, worm and worm wheel made of steel (as pictured). These features ensure long life and durability of the device. Its advantage is the possibility to adjust the worm and worm wheel clamping, clearing backlash in the drive mechanism, which may be necessary in the case of wear and tear after long-term use. The device surface is covered with powder coating, effectively protecting against corrosion. Range trading is protected by limit switches.
RAS HR
RAS HR
Rotor RAS HR is a high-strength, designed to run large satellite dishes and comes complete with an electronic control unit. The rotor is designed in such a way that it is possible to assemble “pipe in pipe”, or on an optional adapter plate for mounting in the configuration of a conventional tower. It can also be mounted outside of the tower, mast or wall mounted.
RAK HR
RAK HR
Rotor RAK HR works with controller Rot1Prog. It it can be used for lightweight construction, such as Yagi and heavy shortwave antennas. It is based on the worm gear, worm and worm wheel made of steel (as pictured). These features ensure long life and durability of the device. Its advantage is the possibility to adjust the worm and worm wheel clamping, clearing backlash in the drive mechanism, which may be necessary in the case of wear and tear after long-term use. The device surface is covered with powder coating, effectively protecting against corrosion. Range trading is protected by limit switches.
RAEL HR
RAEL HR
Rotor RAEL HR can be used for lightweight construction, such as Yagi and heavy shortwave antennas. It is based on the worm gear, worm and worm wheel made of steel (as pictured). These features ensure long life and durability of the device. Its advantage is the possibility to adjust the worm and worm wheel clamping, clearing backlash in the drive mechanism, which may be necessary in the case of wear and tear after long-term use. The device surface is covered with powder coating, effectively protecting against corrosion. Range trading is protected by limit switches.
BIG-RAS HR
BIG-RAS HR
Rotor BIG RAS HR is a high-strength, designed to run large satellite dishes and comes complete with an electronic control unit. The rotor is designed in such a way that it is possible to assemble “pipe in pipe”, or on an optional adapter plate for mounting in the configuration of a conventional tower. It can also be mounted outside of the tower, mast or wall mounted.
BIG-RAK HR
BIG-RAK HR
Rotor works with controller Rot1Prog. It it can be used for lightweight construction, such as Yagi and heavy shortwave antennas. It is based on the worm gear, worm and worm wheel made of steel (as pictured). These features ensure long life and durability of the device. Its advantage is the possibility to adjust the worm and worm wheel clamping, clearing backlash in the drive mechanism, which may be necessary in the case of wear and tear after long-term use. The device surface is covered with powder coating, effectively protecting against corrosion. Range trading is protected by limit switches.
RAU
RAU
Rotor works with controller Rot1Prog. It it can be used for lightweight construction, such as Yagi and heavy shortwave antennas. It is based on the worm gear, worm and worm wheel made of steel (as pictured). These features ensure long life and durability of the device. Its advantage is the possibility to adjust the worm and worm wheel clamping, clearing backlash in the drive mechanism, which may be necessary in the case of wear and tear after long-term use. The device surface is covered with powder coating, effectively protecting against corrosion. Range trading is protected by limit switches.