SPID RING – 01
Specifications
| SPID RING – 01 | SPID RING – 01 HR | |
|---|---|---|
| Rotating Torque: | > 900 Nm | > 900 Nm |
| Vertical load: | > 40 KG | > 40 KG |
| Break type: | Double worm | Double worm |
| Carter: | Stal (Galvanised) | Stal (Galvanised) |
| Gear: | Stal (Galvanised) | Stal (Galvanised) |
| Mast plate: | Stal (Galvanised) | Stal (Galvanised) |
| Reduction ratio: | 1:10200 | 1:10200 |
| Endocer type: | Magnetic – 1 pulse | Magnetic – 32 pulse |
| Precision: | 0.8º | 0.1º |
| Rotation angle: | 360º +/- 180º | 360º +/- 180º |
| Rotation time for 360° (12V): | ~4.5 min. | ~4.5 min |
| Rotation time for 360° (24V): | ~2.2 min. | ~2.2 min |
| Electric motor: | 12 Vdc | 12 Vdc |
| Enviornment: | -20° / +50° | -20° / +50° |
| Weight antenna rotor: | 45 KG | 45 KG |
Controllers
| ROT1PROG | |
|
Stacker works with RAU and RAK turntables and with all pulse output turntables. Stacker was made for operators whitch make rotors themself and for untipical equipment. |
| MD-01 | |
|
MD-01 is an electronic driver used for turning rotors. It is a multifunctional device, allowing for various combinations of work setting. The driver may be connected to two single rotors (e.g. two Azimuth rotors) or double (one Azimuth / Elevation rotor). The basic circuit provides operation with direct current motors. |
| MD-02 | |
|
MD-02 is an electronic driver used for turning rotors. It is a multifunctional device, allowing for various combinations of work setting. The driver may be connected to two single rotors (e.g. two Azimuth rotors) or double (one Azimuth / Elevation rotor). The basic circuit provides operation with direct current motors. |
