SPID RING – 02
Specifications
| SPID RING – 02 | SPID RING – 02 HR | |
|---|---|---|
| Rotating Torque – 1 motor @ 24V: | > 1700 Nm | > 1700 Nm |
| Rotating Torque – 2 motor @ 24V: | > 3050 Nm | > 3050 Nm |
| Vertical load: | 80 KG | 80 KG |
| Break type: | Double worm | Double worm |
| Carter: | Metal (Galvanised) | Metal (Galvanised) |
| Gear: | Metal (Galvanised) | Metal (Galvanised) |
| Mast plate: | Metal (Galvanised) | Metal (Galvanised) |
| Reduction ratio: | 1:15000 | 1:15000 |
| Endocer type: | Magnetic 1 pulse | Magnetic 32 pulse |
| Precision: | 0.8º | 0.1º |
| Rotation angle: | 360º +/- 180º | 360º +/- 180º |
| Rotation time for 360° (12V) | ~7.5 min. | ~7.5 min. |
| Rotation time for 360° (24V) | ~3.7 min. | ~3.7 min. |
| Electric motor: | 12V lub 24V | 12V lub 24V |
| Enviornment: | -20° / +50° | -20° / +50° |
| Weight antenna rotor: | 60 KG | 60 KG |
Controllers
| ROT1PROG | |
|
Stacker works with RAU and RAK turntables and with all pulse output turntables. Stacker was made for operators whitch make rotors themself and for untipical equipment. |
| MD-01 | |
|
MD-01 is an electronic driver used for turning rotors. It is a multifunctional device, allowing for various combinations of work setting. The driver may be connected to two single rotors (e.g. two Azimuth rotors) or double (one Azimuth / Elevation rotor). The basic circuit provides operation with direct current motors. |
| MD-02 | |
|
MD-02 is an electronic driver used for turning rotors. It is a multifunctional device, allowing for various combinations of work setting. The driver may be connected to two single rotors (e.g. two Azimuth rotors) or double (one Azimuth / Elevation rotor). The basic circuit provides operation with direct current motors. |
